Unidirectional hydraulic pump in aluminium and with external gears, German standard.
It is a component of group 2 and of type BH, according to our product classification for the application of screws. In the following/adjacent figure, you will find a diagram showing where the empty holes for the fixing screws are located on BH models.
Features and functions
The flange of this model has a diameter of 52 mm. The rotation verse of the pump is clockwise or counterclockwise and you can reverse it without having to add any
components* to optimize storage space and adapt the product to your needs. Please refer to page 25 of this catalogue for instructions on changing the rotation verse.
This model is also available with cast iron flange.
* Valid for all versions of this model except those with the outlet or inlet in the front flange
Technical Data
- Displacements from 4.2 cm3/rev to 39.6 cm3/rev
- Maximum pressures up to 300 bar
- Rotation speeds up to 3500 rpm
Options available
- Viton
- Maximum pressure valve
- Inlet and outlet in the body, front flange or back cover
- Double shaft
- Other shafts available:
- Milled shaft
- Splined shaft
In the following tables you will find the most common versions of this product in STEP format. For other configurations please contact our technical office.
